Of your many moulds..............................

[Ben]

Of the moulds that you own, name a few that money won't buy and you NEVER plan to sell them.

Ben

 

[Brad]

My MP 359640
My Lee GB for the 300 gr bullet I use in 45 Colt.
My Lyman Keith HP for 357

 

[Rick]

Sell? I thought selling your children was illegal??

 

[Brad]

I have given a couple moulds away but don't recall selling one. Then again, I buy very few moulds.

 

[smokeywolf]

Sell moulds? Likely not. Don't have that many moulds and most are old Ideals.

 

[KeithB]

I think my widow will sell my molds.

 

[kenneth]

My favorite is a 40 cal lyman rn wheihs about 320 pb. And a resent 230 lee 8 mm. Some ive made and some rb for ole perc rev. Otherwise ihave given mouls away to people who have need them. Never sold any...

 

[Ben]

I can never picture me selling my SAECO # 315.
Buckshot HP'd one cavity and removed the g/c shank on the other cavity about 10 - 12 yrs. ago. One of my all time favorite .30 cal. moulds.

 

[waco]

My Accurate 460-405-V for the Marlin 1895 will never leave. Way too accurate!(pun intended)
My RCBS 45-270-SAA cast like a dream and drops beautiful bullets that shoot well in my 1873 clone.
I also really like my NOE 5 cavity H&G68 clone mold. Solids or HP's

 

[waco]

 

[Ben]

We have a lot of members, I'm hoping for a lot of participation in this one ! ! !

 

[gman]

That's a tough one. I have a few BRP molds that I acquired just before Bruce quit making them. Don't think I could ever part with those. To be honest though I'm not parting with any of them until I'm planted.

 

[fiver]

I could part with a bunch of my molds and not even miss them.
I have even been thinking about selling one of the master casters and the molds with it.

some of the ones I would for sure keep.
452664- 452430
429667
the 35 cal equivalent lyman rnfp [I forget the number]
rcbs 30-150 fngc
rcbs 30-165 silhouette
rcbs 7-145 silhouette
saeco #248 [358 win mold]
Ideal single cavity 321*** for the 32 Winchester.
my walt melander molds
Accurate's 165-A
the rapine 25 cal 72gr plain base mold
375449
the HM-2 9mm mold
rcbs 32-098 rnfp
my 41 cal wad cutter lyman mold.
and the round ball molds

that's pretty much what would stay, not because I need them but because they make a pretty good set that covers most everything that needs covered.

 

[KHornet]

Have quite a few single cav that could go down the road, but
doubt they ever will.

Paul

 

[Kevin Stenberg]

I only have 3 that I would keep. NOE 311-165 RD the old style small meplat, My first mold ever Mihec 503 copy Cramer HP, Mihec 432423 solid.
The oddest casting mold is one I just got from Ben. Its a 311467. 1 cavity will drop its bullet any time I open the mold. The second cavity the only way it easily gives up its bullet is if I open the mold IMEDIATELY after I cut the sprue. If I delay even 1 second I have to repetedly tap the mold

 

[Ian]

Lee group buy 311041
BRP 35-220 HP
Ace 22-75

Most of the others could be replaced.

 

[Ben]

I only have 3 that I would keep. NOE 311-165 RD the old style small meplat, My first mold ever Mihec 503 copy Cramer HP, Mihec 432423 solid.
The oddest casting mold is one I just got from Ben. Its a 311467. 1 cavity will drop its bullet any time I open the mold. The second cavity the only way it easily gives up its bullet is if I open the mold IMEDIATELY after I cut the sprue. If I delay even 1 second I have to repetedly tap the mold

You may need to spin a bullet in the cavity with some mild abrasive compound. That usually cures that problem.

Ben

 

[yodogsandman]

I'm keeping them all! I've sold 2 and it haunts me, even though I still don't own guns in those calibers. I've given 2 away to brand new, wannabe casters and hope it wet their appetites.

 

[Ben]

I've given 2 away to brand new, wannabe casters and hope it wet their appetites.

That is a very kind act.
I hope that good fortune will revisit you ! !

Ben

 

[USSR]

MP 359640, MP 358429, MP 359395, MP 452185, MP 452200, MP 454423, MP 454270-SAA - do we see a trend here?

Don