Tom
Well-Known Member
My freightliner ww reservoir holds less than a gallon and is a pita to fill, under the bunk.
I procured a 2 1/2 gallon square bucket figuring on putting the pump in the lid with drop tube. Turns out the pump won't lift, it has to be near the bottom. I rigged a bulkhead fitting and an elbow and it worked for a while. Now, it leaks at the bulkhead fitting and I can't seal it.
Now my question. Is there such a thing as a 12v pump that would lift 10 inches? I'm thinking that if the pump were too stout, it might blow the line if the jets clogged with ice.
Thanks in advance.
I procured a 2 1/2 gallon square bucket figuring on putting the pump in the lid with drop tube. Turns out the pump won't lift, it has to be near the bottom. I rigged a bulkhead fitting and an elbow and it worked for a while. Now, it leaks at the bulkhead fitting and I can't seal it.
Now my question. Is there such a thing as a 12v pump that would lift 10 inches? I'm thinking that if the pump were too stout, it might blow the line if the jets clogged with ice.
Thanks in advance.