WSF loads for a .32 S&W Long

[Jeff Michel]

I have acquired a pound of WSF and was interested in some suggestions with respect to starting loads in a .32 S&W long. Data appears to be pretty sparse south of 9mm and 38 special. I am under the impression that WSF falls somewhere between Unique and Herco. Any input would be appreciated.
Thanks

 

[Rick]

Here's a Hodgdon burn rate chart that lists WSF, slower than Unique, nearly the same as Herco.

Hodgdon Burn Rate Chart

 

[freebullet]

I have no experience with this caliber. I do load for a 380 which is similar.

Based on burn rate & lyman cbh4 I would start at 3 grains under an 85gr boolit or 2.5gr under a 75 gr. Work up to 3.5 and very carefully any further not surpassing 4gr with either boolit.

If your working with 95-100 gr boolits I'd start around 2gr and very carefully work toward 3gr