Yep, that's the one I was taught, and it was a very long time ago.In electronics school, I learned it as "Bad Boys Rape Our Young Girls, But Violet Gives Willingly"
Black Brown Red Orange Yellow Green Blue Violet Grey White (electronic resistor color code sequence)
Man!! That was a long time ago!!!!
Same as I learned during tech school in the USAF in 1977.In electronics school, I learned it as "Bad Boys Rape Our Young Girls, But Violet Gives Willingly"
Black Brown Red Orange Yellow Green Blue Violet Grey White (electronic resistor color code sequence)
Man!! That was a long time ago!!!!
OOPs quoted wrong post. Sorry.Hi,
I drilled a hole in the back of the box and put round hole crimps on both ground wires from the cords and then screwed them both together with a screw.
That way not only is the Pot grounded but also the Aluminum Box to help me avoid a shock, touching it ,if there is a problem.
I see no neutral on the SSR, unless you are talking about the Neg Pin?
There is no 120V neutral on the SSR. Only hot wires. Terminals 1 and 2 have a contact between them. When low voltage on 3 and 4 is energized contact closes between 1 and 2 sending power to plugin.did you connect the chassis ground to the 120v neutral on the SSR?
Kind of hard to see in photo?
Hi,
Yep!Hi,
Yes, just like a 4 pin Relay for your Car...
2 Pins for the Load and 2 Pins for Control.
I guess that's why they call it a Relay!...