Distance you test at?

Spindrift

Well-Known Member
100m is my default range for rifle testing.

When testing slow- moving bullets with dubious flight characteristics, I shoot at 50-60m. This reduces the influence of wind.
 

Farmerjim

Active Member
25 yds to put scope on paper, then 100 yds because that is where the feeder is set up. 22lr 50 yds. Handgun, 25 yds offhand 50 yds braced.
 

JonB

Halcyon member
I see a few mention Metric
Quick question, are NRA sanctioned matches in yards? or Meters? Specifically 100 (yards or meters)?

Here is the story:
Many years ago, I put in the Rifle range (100 yd) in the back yard at our sportsman club, which was also the trap range. I measured 100 yards from the concrete sidewalk markers for the trap stations(which are right behind the cabin), to the Berm, to permanently install the target backers. In 2019 the club decided to pour a slab, for a rifle bench shelter, but the person in charge, not only didn't pour it square to the target backer and earth berm (it was poured square to our cabin), they also positioned the slab farther away from the sidewalk trap stations because they felt it was too close to the cabin. We never finished the benches and shelter, because of the Covid times ended our fundraising. Anyway, now we have a angled slab that when we put benches on it, is about 90 yds on one side, and 93 yards on the other side. The plan is to move the part of earth berm and the target backers (to a correct angle) to 100 yds, to line up with the new concrete slab. I said we should just leave it as is...93 is close enough for me, LOL. But the guy who is ramrodding this project wants it 100 yrds, in case we ever hold a NRA sanctioned event. So, this leads me back to my original question, Do we want to make the appropriate adjustments for 100 meters? So instead of moving things about 9 yards, we'd move them about 18 yards.
 
Last edited:

Rick

Moderator
Staff member
Both IHMSA and NRA silhouette ranges are in meters, however both allow for a range to be in yards for existing ranges.
 

todd

Well-Known Member
i have a 50 yard target right out my door. 100 and 150 yard targets at my shop (4 miles away) and i can do up to 700 yards if i go my shop's neighbor house. i used to shoot my 22-250AI at 600 yards from my neighbors' place.

the place i hunt only lets me 60ish and under, but there are few tree lanes that will go 125+ yards.
 

porthos

Active Member
since accuracy for rifles is judged at 100 yds ; and pistols/revolvers at 25 yds. self defense handguns at 7-10 yds. why are you shooting so close. if you want to look at small groups shoot scoped rifles at 25 yds. and handguns at 10 yds
 

JonB

Halcyon member
Photo submitted for your entertainment.
I was at the range a couple days ago, and took a photo of the 100 yd berm and target backer that is likely to get moved either 9 yds or 18 yds.
For size reference, the multiple 4' x 8' plywood target backers are mounted on upright 8 foot Railroad Ties
BTW, If I have any say, we won't be moving them.

100 rd target backer side 2023 1Kpx.jpg
 

BudHyett

Active Member
Just curious as to what distance you test your loads? I start at 50 yards. Is this a good distance?
My criteria is more severe than most since I compete in CBA and ASSRA matches plus shoot prairie dogs, both requiring consistency.

I start at 100 yards with ten-shot groups. This is calling each shot for both impact and wind conditions. Once I feel a load is performing, I confirm at 200 yards.

When I was actively competing in pistol Bullseye Competition all loads were tested at 50 yards in a Ransom Rest. This provided some interesting data, few reloads work well at that range.
 
Last edited:

Bazoo

Active Member
I usually test handgun rounds at 15 yards. Then I move to 25 and farther. Rarely i'll test at 75. Rifle I generally test 50 or 75. Mostly I'm a short range offhand shooter though. So to be able to hit 4" offhand repeatably at 75 yards with a rifle is my goals generally.
 

Ian

Notorious member
Aren't all internationally-sanctioned shooting sports regulated in meters? For NRA stuff I just go by what distance and measuring system is written on the official target.
 

CZ93X62

Official forum enigma
7/10/15/25 yards for defensive sideiron, rollers or sliders.

25 and 50 yards for hunting handguns.

100/200/300 yards for goblin rifles; same for varmint rifles, with some 400 to 600 paper recreation on occasion.

100 and 200 yards for game rifles. I zero at 200 yards, and check impacts at 300 yards to confirm trajectory outcomes. They are pretty close, actually. Leverguns are all iron-sighted, I test at 50 and zero ar 100, check drop at 150. That too is close to the book.