Elric
Well-Known Member
In light of folks looking at loading with the primers they got on-hand, I thought this was interesting. Note that this worked for Red Dot and W-296. I do NOT in any way suggest that these results can be applied to any powder. Note also that John was using a cast bullet, which is easier to get going than a jacketed bullet.
All errata are mine. If you want to be totally sure, buy the back issue...
Handloader Magazine #277, April-May 2012, pages 59-60
"The Old is New" Handloads for a .41 Remington Magnum
by John Haviland [PBUH!]
"Thumbing through my chronograph records, I found the results of a comparison between standard and magnum large pistol primers in the .41 firing Red Dot and W-296 with the RCBS bullet [Ed. RCBS 41-210-SWC]. The results of shooting CCI 300 standard and CCI 350 magnum large pistol primers are listed in Table 1, and it shows no need for a magnum primer with a light amount of powder, but the additional 125 fps with a heavy charge of W-296 was well worth the added cost of a magnum primer"
Table 1 - Primer Comparison
All errata are mine. If you want to be totally sure, buy the back issue...
Handloader Magazine #277, April-May 2012, pages 59-60
"The Old is New" Handloads for a .41 Remington Magnum
by John Haviland [PBUH!]
"Thumbing through my chronograph records, I found the results of a comparison between standard and magnum large pistol primers in the .41 firing Red Dot and W-296 with the RCBS bullet [Ed. RCBS 41-210-SWC]. The results of shooting CCI 300 standard and CCI 350 magnum large pistol primers are listed in Table 1, and it shows no need for a magnum primer with a light amount of powder, but the additional 125 fps with a heavy charge of W-296 was well worth the added cost of a magnum primer"
Table 1 - Primer Comparison
Primer | Powder | Grains | Avg fps |
CCI 300 | Red Dot | 7.0 | 1,066 |
CCI 350 | | | 7.0 | 1,069 |
CCI 300 | W-296 | 21.0 | 1,257 |
CCI 350 | | | 21.0 | 1,382 |
Last edited: