Tax Day Push Back

quicksylver

Well-Known Member
So here's the story.
After finalizing things at H&R Block on Friday, I swung by a couple of our LGS.

The only things of interest I could find were two Stevens 340-c's, one in 30-30,
the other in .222 Rem. ( that one had a period scope mount), both were priced at
$300.00.

The second shop had just received a powder shipment so I treated myself to a pound of Unique.
As I was chatting it up with the shop owner I noticed a Remington 700 on the shelf, then I noticed its barrel.
Turned out to be a Remington 700 in 308 Win, sporting a heavy 24" barrel.
SOOO I asked to see it.

The barrel code places the date of manufacture on Feb, 2008.
It has what believe to be the 5-R rifling, 5 grooves, right hand.

After chumming it up with the owner I found myself walking out the door with it for $100.00 more than the asking price of one of the 340-C's.

Don't know if that was a good deal or not but it sure made a great place to store the Leouplod Vari x 111, 6.5x20 I had hanging around.

So here are the picture, if anyone can add some info on it I would appreciate it, as I don't know much about non military firearms.

BTW the trigger is incredible.

Today was not the best of range days, steady 15 knot wind at 3:00 with gust to 25.

But at least I got to shoot it.

My reloads were more or less cobbled together by using an old Lyman FL die, 300 Savage expanding die and a 300 Savage seating die.

New dies are on their way.

As I said any info on the gun and suggestions on bullet and powder selection are welcomed.

Thanks for listening guys.
 

Attachments

  • 20160416_134704.jpg
    20160416_134704.jpg
    293.3 KB · Views: 28
  • 20160416_134632.jpg
    20160416_134632.jpg
    261 KB · Views: 27
  • 20160416_135041.jpg
    20160416_135041.jpg
    141.8 KB · Views: 27
  • 20160416_135032.jpg
    20160416_135032.jpg
    137.9 KB · Views: 26
  • 20160416_135015.jpg
    20160416_135015.jpg
    71.4 KB · Views: 27

Brad

Benevolent Overlord and site owner
Staff member
Yeah, Uncle Sam won this round of taxes. No left overs for me.
 

quicksylver

Well-Known Member
Thanks guys..
35...I am hoping I can get it to shoot. I figured that if the throat was worn or whatever, with the heavy barrel I could send it out to JES and end up with a 358 Win.
 

35 shooter

Well-Known Member
Thanks guys..
35...I am hoping I can get it to shoot. I figured that if the throat was worn or whatever, with the heavy barrel I could send it out to JES and end up with a 358 Win.
That's the great thing about 308's lol....there's a 358 win. hiding inside them just waiting to come out.
 

quicksylver

Well-Known Member
BTW guys I was able to seat all those bullets posted in the pictures above the shoulder and did not get any ingraving I could see.
 

Ben

Moderator
Staff member
Dan,

I think you're off to a great start with that 308 Win.
I looked at each of your targets.
Knowing you, you'll have it shooting in a little bug hole real soon.

Ben
 

quicksylver

Well-Known Member
Thanks Ben.

Think I will wait for the dies before I do anymore reloading fot it.

BTW....I got my starting loads by reading your old posts on the other site....

You definitely have established a legacy. ...

Dan
 
9

9.3X62AL

Guest
Zero cast bullet experience with the 308 Winchester, but TONS of trigger time on one of those 700V variants and a Ruger 77V that the Remmie replaced. 46.0 grains of WW-748 pushing a Sierra 168 Matchking duplicates the Federal Gold Medal Match load, in W-W brass (about 2675 FPS in a 24" barrel). Federal 308 brass was softer than a politician's handshake, I used W-W or GI brass for reloading. Subtract 1.0 grain in LC brass. After 8 years of dragging 308s with truck-axle barrels over hill & dale hunting evildoers and malefactors, I have elected against fat tubes on my sporters/hunters. Those hefty tubes shoot wonderfully, but they get onerous for all-day carry. I sold my last 308 about 20 years ago, have gone 30-06 since doing so. But if I ran onto a 700V in 308 for $400, I wouldn't hesitate to retool for the caliber. Even if the barrel was shot out, $400 for the action/wood/metal alone would be almost fair. You did just fine.

The Tax Man didn't hurt us this year.
 
Last edited by a moderator:

quicksylver

Well-Known Member
9.3...glad to hear you made out OK ,we all deserve a break now and then.

My last three hunting style guns in 308 were two 88's and a 100.

I shot cast in the 88's ,they were good guns.

That was about 25 years ago.

The next 308 was the M1a , but that got dropped in favor of the .223, cheaper and far less recoil, that was about 25 years ago as well.

Now I find myself back at the begining....

Does seem like the '06's are easier to tame with cast.

Time will tell...for me anyways...plenty of other folks have been shooting cast in the 308 with success. ...

If I don't get bug holes with it it probably will go....
 

quicksylver

Well-Known Member
I'm not certain about that Dan,
If there is a way to shoot a group that looks like Buckshot from a 12 ga., I can find it.

Thanks,
Ben

Didn't see anything like that in those post Ben.

As a mater of fact those post are what got me serious with my cast bullet shooting.

What you are definitely partially responsible for is thousands of jacked bullets sitting idle on my reloading room shelves.
 

JWFilips

Well-Known Member
Dan,
No doubt You will be audited after that purchase! What a price What a rifle!
A bit of work & you will be having that shooting real well!
I must be in Limbo here because such prices do not exist anywhere like that around me!
This is great .... I like to call it Thread fodder! Looking forward to a lot of new postings on this one!
Jim
 

KHornet

Well-Known Member
Like Dan, I also have a whoop of jacketed (other than 224's for pdog) sitting idle. Must be a couple thou or more.