I id a little stock work on the wrist and wanted to repair a bubba work installing a second sling stud.
The enscussion came right out. So that was easy. PO drilled it off center and it was simply unsightly. I liked the idea so after installing a Harris pod, I saw room to move it forward. I measured and drilled and got that complete. Then took ta filling the bad hole.
The wrist on most rifles dont usually fit my large thicker hands well. This fiberglass worked easily and feels far better now.
Then I addressed the barrel channel. The new barrel has a .750 straight profile. So altho I need to have barrel In hand to fit... I needed to remove the epoxy pad at the tip and dress the JB weld used to fill the bad hole.
After removing the pad at the tip, I exposed some voids in the glass. JB filled them nicely too.