Downsizing List 1 (CLOSED)

[462]

Downsizing List 1
All items are plus shipping via USPS priority mail.
The more you buy, the more you save.
Personal check or USPS money order only.

DIE SETS
Redding 84131 Deluxe 6.5X55 Swedish Mauser
Full length sizer, neck sizer, seater
Included: Lyman Precision Alignment (PA) sliding sleeve seater die. Priced reduced to $55



Hornady custom grade full length and seater
.308 Winchester, in the old style semi-transparent red plastic box
Includes Lee case trimmer pilot and trimmer shellholder $30 Price reduced to $25





BRASS
7.62X51 242 pieces of range pickup, mixed headstamps, some prepped Price reduced to $25
.44 Magnum, range pickup, mostly prepped, 95 pieces Price reduced to $20

 

[BBerguson]

Michael,

I’ll take the .311 die for $15 and the 308 brass for $36. I’ll add it to the check I’ll be sending you. Let me know if you need any more for shipping.

B

 

[462]

Michael,

I’ll take the .311 die for $15 and the 308 brass for $36. I’ll add it to the check I’ll be sending you. Let me know if you need any more for shipping.

B

Bryan,

Hold off on the check. All the items should fit in a medium flat rate box, but I need to check. I'll get back with you tomorrow.

Thank you!

 

[BBerguson]

Ok, will do. Our plans have changed a little anyways. I have a meeting I really shouldn’t miss at work Monday morning and Joseph has an accounting meeting for college too, so, I’m not going to be out hunting all day like I originally thought.

 

[richhodg66]

I'll take the .318 sizer and the .44 Special brass.

 

[JustJim]

I'll take the .313 and .314 sizing dies.

 

[L Ross]

Is 75 bucks a reasonable offer for an unknown maker tang sight? Are there three holes in the mounting base? Never seen that before.

 

[462]

I'll take the .313 and .314 sizing dies.

Hello, JustJim.

The .313" and .314" lube/sizing dies are yours.
I'll send you a PM later today.

Thank you!
Michael

 

[462]

Is 75 bucks a reasonable offer for an unknown maker tang sight? Are there three holes in the mounting base? Never seen that before.

Hello, L Ross,

Yes, sir, it is. I'll take more pictures and post them in a PM later today.

Thank you!
Michael

 

[462]

Moderator,

I'll eliminate the sold items later today.

Thank you,
Michael

 

[462]

List updated.

Michael

 

[462]

List updated.

 

[462]

Surely someone needs this stuff.

 

[Ian]

Don't call me Shirley, Shirley is a half-blind QC inspector for a popular mould manufacfurer

Does the 6.5x55 set come with any neck bushings? Talk to me about this Lyman seating die, is it like the Forster which has a sliding sleeve which moves with the case and holds the case in line with the bullet punch? Will it work with .268" cast bullets?

 

[462]

Don't call me Shirley, Shirley is a half-blind QC inspector for a popular mould manufacfurer

Yep, Shirley helped me out a lot, when it came to learning how to make Lee stuff work properly.

The neck die does not use a bushing, just a straight forward, old fashioned neck sizing die.

I'm not a good descriptor of things, but here goes:
I would liken Lyman's PA dies to Forester's without the spring. The die body is dimensioned to the cartridge case (or family of cases), unlike Hornady's one size fits all. The sliding sleeve is countersunk so as to help align the case mouth. In other words, the case is held securely enough for it to pass through the die with minimal misalignment. I enlarged the sliding sleeve to allow my lubed obese .268+" bullets to pass through it. The seating stem is designed for spire pointed bullets, but I used hot melt glue to fit the 266469's nose. The glue has been removed. By the way, the die is designed to crimp, but I just backed the body out so it didn't.

If you like, I'll be glad to take pictures.

 

[Ian]

Not quite the tooling I'm looking for, but thanks for the details.

 

[462]

Updated with lower prices.

 

[462]

Going once!

 

[462]

Going, twice . . . gone.

Moderator,
please close this thread.

Thank you,
Michael