Dumb question time

JWFilips

Well-Known Member
UncleJimbo,
At least I can send you some of my Frizzen Hardening mix if you like!
How long is the FP? Need to put in the center of a can with the mix around it!
Jim
 

uncle jimbo

Well-Known Member
Here are some pictures, (I am a terrible picture taker).
20200220_180219.jpg20200220_180222.jpg20200220_180240.jpg20200220_180242.jpg
Like I said it is a cheap rifle. I appreciate all the offers but I am going to try this first.

I am going to heat the steel using a torch until the steel glows red-hot.
I an going drop into some motor oil. Leave in the oil for approximately 60 seconds
Remove from the oil and wash it using dish soap and water.
Reheat it until it is blue-hot. And if I understand it, blue is the color steel turns just before it becomes red-hot.
Drop it in a vat of room-temperature water. Allow to cool in the water. Hopefully this will giver me what I want.
 

JWFilips

Well-Known Member
OK When you get to the wash in dish soap Dry it and polish it with some 0000 steel wool until bright !

Then play the torch ever so slowly over it you will see colors forming in the metal! Stop at straw yellow and quench again in oil or water