The picture on the box label shows a flat meplat, and that is noticeably different than the cavities. Apparently, the new cutter is longer than the old, and I wouldn't be surprised to see THAT mould leak out the bottom once it gets hot. It will fin the nose at minimum.
Reasonable load for such a heavy bullet in a modest weight rifle? See how much ffg BP will fit in the case after trickled through a 24" drop tube, compressed 1/8", card wad under the bullet, and the bullet seated to just kiss the rifling.
Reasonable load for such a heavy bullet in a modest weight rifle? See how much ffg BP will fit in the case after trickled through a 24" drop tube, compressed 1/8", card wad under the bullet, and the bullet seated to just kiss the rifling.