quicksylver
Well-Known Member
OK....Here are my comments.
1. Should work fine once or twice.
2. The crimp groove would work with BLL or traditional lube, BUT I would be concerned about it w/
powder coating or any other hard coating.
We all know that bullets like the x-treme copper plated stuff should only be used with a mild taper crimp as
a strong taper or roll crimp can cut the coating and cause it too separate and wedge in the barrel.
3. Paper patch the s-x-x-x-x-r or knurl it.
4. It is a really sub gauge shotgun slug or black powder bullet waiting for a sabot sleeve.
My question , are they commercially cast?
1. Should work fine once or twice.
2. The crimp groove would work with BLL or traditional lube, BUT I would be concerned about it w/
powder coating or any other hard coating.
We all know that bullets like the x-treme copper plated stuff should only be used with a mild taper crimp as
a strong taper or roll crimp can cut the coating and cause it too separate and wedge in the barrel.
3. Paper patch the s-x-x-x-x-r or knurl it.
4. It is a really sub gauge shotgun slug or black powder bullet waiting for a sabot sleeve.
My question , are they commercially cast?