burbank.jung
Active Member
I've been selling some of my toys so I can buy some MP molds. They out of Europe. If I place an order with them, I'll receive dies within a reasonable amount of time, yes? Thanks for your affirmations.
Is MP Molds service reliable?
- Thread starter burbank.jung
- Start date
burbank.jung
Active Member
Did you order straight from the Seller in Europe?
Michael
Active Member. Uh/What
I am pretty sure most of us here order direct. Shipping is very quick, usually a week to 10 days, sometimes alot quicker. Shipping to the US will run in the neighborhood of $25 - $35 roughly. If your order is over 299 Euro, shipping is free. I have no hesitation about ordering from MP again. Hope this puts you at ease.
burbank.jung
Active Member
It does. Thanks so much
Wasalmonslayer
Well-Known Member
He is very reliable. Just buy direct from his website.
Super fast shipping too!
Super fast shipping too!
burbank.jung
Active Member
Has either of you tried his handles? I plan to use my Lee handles.
Wasalmonslayer
Well-Known Member
I use lee handles better ergonomics.
His handles are not my fav.
seagiant1
Active Member
Hi,
I use the LEE Handles, as you can see in my pic.
The wood part usually gets loose, with use and all you need to do is take some regular...
Gorrilla Glue and glue it and it is NOT coming off.
Roughen and clean shanks before glueing.
Used to drill and pin and is not really needed with that Glue now!
I use the LEE Handles, as you can see in my pic.
The wood part usually gets loose, with use and all you need to do is take some regular...
Gorrilla Glue and glue it and it is NOT coming off.
Roughen and clean shanks before glueing.
Used to drill and pin and is not really needed with that Glue now!
Last edited:
CWLONGSHOT
Well-Known Member
Buy without worry.
I live in New England USA. I get quicker delivery from MP then I can ordering out of Texas, Tennessee or Michigan!!!
My single complaint is he wont answer emails.
But the product is second to none in function and beauty. I always buy brass from MP.
Best of luck with yours.
CW
I live in New England USA. I get quicker delivery from MP then I can ordering out of Texas, Tennessee or Michigan!!!
My single complaint is he wont answer emails.
But the product is second to none in function and beauty. I always buy brass from MP.
Best of luck with yours.
CW
358156 hp
At large, whereabouts unknown.
I suspect the email issue is probably related to language barriers. He sells to many different countries, and while many Europeans are multilingual out of necessity, there are limits to everything. His email service may simply be poor or non-existent too.
OP- I have several (6+) of Mihas moulds, and wouldn't hesitate to order more from him as long as his shipping doesn't go through Russia or Ukraine
.
Wasalmonslayer
Well-Known Member
He speak English very well!
I have had several phone call conversations with him.
He just spends his time making molds in the shop not much “desk time”
Very small shop and he is lead machinist!!
I have had several phone call conversations with him.
He just spends his time making molds in the shop not much “desk time”
Very small shop and he is lead machinist!!
Wasalmonslayer
Well-Known Member
You pinned it Fiver if they have it buy it if not accurate!!
I just finished 20# of 357 and 44 SWC’s out of my new accurate molds and they are mighty fine!!
Both cast spot on and just roll out when opened.
Lots of good choices these days!!