M3845708Bama
Active Member
For guys who run a dehumidifier, the air blown out is very dry and gets warm a wire mesh basket set so the outlet air flow a round and through the basket makes a great case dryer.
If you don't decap, you don't get clean primer pockets. Unlike Media, pins don't block primer pockets.
No my pockets are the cleanest. There is no way media of any type can get into a primer pocket and clean it with the primer in place.
Amusing how any suggestion will always be shot down regardless of its accuracy.
Ah, ha your pockets are clean because you uniform them. I agree that uniforming is good unless you use Nosler brass.
I follow Glen Zediker's advice on all things.
Not necessarily. I tumble before decapping and there's a really good chance I have the cleanest primer pockets you've ever seen. After decapping all primer pockets are uniformed with the Sinclair primer pocket tool.
Clean is nice but is it better? Polished, shiny cases do look nice but my guns don’t have eyes.
I have shot just as well with tarnished, dirty, uncleaned as I have with new, shiny, or cleaned brass.