.30-06 and the NOE 312299

waco

Springfield, Oregon
I have not shot a lot of cast out of my Ruger M77 ‘06 yet. That is gonna change. I recently bought a new Bergara in the same caliber for my hunting rifle.
I had a bunch of PB 312299 laying around so I weighed out 20 of them, sized to .310” and lubed with 2500+ and an overcoat of BLL.
These will be loaded with 21-23gr SR4759.
I found 20 pieces of RP brass that was decaped and had been annealed.
I FL sized it and did all the case prep on them.
Time to play with some mild cast loads again and take a small break from presision long range stuff.
BC625338-AF07-4A1C-BBD8-B93E4D8B1F43.jpeg3C771035-F69C-4050-8564-D2E2C6F616A5.jpeg
 

Ian

Notorious member
I haven't pulled a trigger since Independence day, but sure do enjoy short-range sniping with suppressed popgun loads. PFFT....*tink*......(snicker)....repeat. it never gets old. Enjoy your plinkers and low-stress shooting, Walter.
 

Intheshop

Banned
I "had" a Ruger '06, tang safety too. One of the very few JB guns round heea.Hornady 150 RN @2700 (30-30 bullet)handload..... but alas,youngest son claimed it before last year deer season,haha. He jacked a nice meat doe with it directly,haven't seen the gun since?

So blast a few Ruger CB's for me Waco.
 

quicksylver

Well-Known Member
9.3 grains of old/ new Universal or equ of unique and you'll be in heaven it'll shoot about 8" low @,100 yds but you can get sub 1/2" groups
 

Ben

Moderator
Staff member
I have not shot a lot of cast out of my Ruger M77 ‘06 yet. That is gonna change. I recently bought a new Bergara in the same caliber for my hunting rifle.
I had a bunch of PB 312299 laying around so I weighed out 20 of them, sized to .310” and lubed with 2500+ and an overcoat of BLL.
These will be loaded with 21-23gr SR4759.
I found 20 pieces of RP brass that was decaped and had been annealed.
I FL sized it and did all the case prep on them.
Time to play with some mild cast loads again and take a small break from presision long range stuff.
View attachment 6491View attachment 6492

You're singing to " my music " now.
Those look great !

Ben
 

waco

Springfield, Oregon
Dan. I just might try your load. I have about 13 pounds of Universal and I don’t use it in a lot of applications.
I remember you posting some killer groups with it.
I forgot these are PB :embarrassed::embarrassed:
My original thought of using 21-23gr of SR4759 would be a bit fast without a GC.
 

KHornet

Well-Known Member
Great bullet either PB or GC'd. Great in o6,
308, and 303, and & 7.62x54 if your mold drops
them at .313-314.

Paul
 

Intheshop

Banned
Intheshop At least it went for a good cause!

Kevin,lost another "good cause" gun over the weekend.An early 870 slug barrel rig,with aftermarket sights no less.The oldest son sweet talked me out of it.

Sorry Waco,back to Ruger'ness.....

Have you sent any downrange yet?