Ian
Notorious member
H&I set:
As-cast and powder coated Lee 312-155 on the right, bullet on left has been nose-first sized in the form die to make the nose a parallel .3005" tapering at 1.5⁰ per side to .3095". The idea for bullets with tapered noses as this one has is only push the bullet into the die far enough to size the amount of nose needed to chamber easily. The taper that is bumped behind the nose will match many throat angles such as 300 BLK and .30-'06 and also will shoot well in most .308s.
I'm going to be making these dies soon on a limited basis as my health and time allows, so if you have a need shoot me a PM and I'll put you on a list.
As-cast and powder coated Lee 312-155 on the right, bullet on left has been nose-first sized in the form die to make the nose a parallel .3005" tapering at 1.5⁰ per side to .3095". The idea for bullets with tapered noses as this one has is only push the bullet into the die far enough to size the amount of nose needed to chamber easily. The taper that is bumped behind the nose will match many throat angles such as 300 BLK and .30-'06 and also will shoot well in most .308s.
I'm going to be making these dies soon on a limited basis as my health and time allows, so if you have a need shoot me a PM and I'll put you on a list.