Saeco luber to Lyman/RCBS type top punch adapters

KeithB

Resident Half Fast Machinist
#1
We offer adapters to use Lyman® style top punches in Saeco® luber/sizers.

For those that own both types of lubers, or already have some Lyman® style top punches, or simply want to utilize a top punch that is generally less expensive and far more numerous, this adapter could be what you have been looking for.

The adapter comes with a setscrew on either side of the adapter so it can be installed either way and an Allen wrench as shown; if you use our Lyman® style top punches with the O-ring stem you won't need it, but for other vendor's top punches you will.

Simply remove the nuts on the guide rods and the pin that anchors the handle bar to the T-piece. Remove the factory part and replace it with our part. Tighten the nuts and replace the handle bar pin and you're good to go!

If you are interested just start a conversation or email me at keith@bigfoottech.tech

Saeco to Lyman adapter - $42/each, $5 shipping for 1-4 pieces, more than 4 - free, can be mixed with other items. I will throw in two Lyman/RCBS style top punches in any caliber or type, your choice.

NOTE: THIS PART HAS A 1/4" (0.250+") WIDE HANDLE BAR SLOT. SOME OLDER MODEL SAECO LUBERS HAVE A 5/16" WIDE HANDLE BAR. PLEASE LET ME KNOW IF YOU HAVE ONE OF THESE AND I WILL RECUT THE SLOT TO FIT.

Saeco to Lyman top punch adapter installed on Saeco luber
saeco_w_Tpiece1.jpg saeco_w_Tpiece2.jpg
 
Last edited: